Union Special Frame3

1	95800BHA56U1-162	Economic-type bottom hemmer for T-shirts etc. Automatic bottom hemmer. Equipped with a two-needle cyliner bed bottom coverstitch machine for hemming T-Shirts, A-Shirts, leisure and sportswear, with and without side seams. Hem width adjustable from 13 - 25 mm. A unique edge guiding system, active across and in the feeding direction eliminates any friction on the fabric, resulting in flat hems. The hem is automatically formed and presented to the machine. The complete operating sequence is microprocessor controlled, including stacking. A two-machine operation increases productivity and avoids operator waiting time. Short training time.
2	2800AML55-30	Bartacking elastic rings Fully automatic unit with a programmable lockstitch bartacker with "Direct Drive" for producing pre-closed elastic rings for slips, pantyhose and medical bandage where the sewing pattern is visible and a maximum of accuracy in alignment and appearance is needed. Elastic width 2.5 mm to 55 mm, elastic length (circumference) adjustable from 280 mm to 9.999 mm. Smallest elastic length - without stacking - 140 mm. Up to 100 pre-programmable patterns available in a memory of 256 KB capacity.. Very short change over time between different sizes. Short change over time between butted and overlapped seams. Sensors for joining and runout of the elastic. Thread break detector. Alarm - lamp and buzzer (switchable) indicates machine stop. Production: up to 4800 elastic rings in 8 hours with an elastic width of 30 mm and 50 stitches of max. 2.8 mm length in the pattern. NB: Production depends highly on the choosen number and length of stitches of the pattern and the quality of the elastic. (Number of joinings).
2A	2800AML55-30CMC	Elastic Joining Robot with Logo Reading Fully automatic unit with a programmable lockstitch bartacker for producing pre-closed elastic rings with logo reading for slips, pantyhose, medical bandages or similar applications. Elastic width 20 to 50 mm. Smallest circumference of the elastic rings approx. 140 mm, depending on logo size resp. space between the logos. Machine is equipped with a sensor which recognizes lumps or butt joints in the elastic and are cut out automatically. Up to 691 seam types can be regulated with the programmer when using a disk. Short change over time between different sizes and between butted and overlapped seams.
3	36200L200-60Z3388AKP with workstation WS72800ES4A851, Cloth guide A10805 and Lap former A10806	Flatseamer with piping Four needle, six thread feed-off-the-arm flatseamer with top cover thread for overlapped joining operations and simultaneously attaching a piping to knit garment parts in the production of underwear and knitted outerwear. Quick adjustment for differential feed, knee switch operated. Horizontal cloth trimming mechanism. Photocell controlled thread and tape cutter, close behind the presser foot, pneumatic presser foot lifter, suction device for trimmings.
4	MO6904COE6307 with workstation WS72800AP3A	Attaching circular collars with display tape Single-needle, three thread cylinder overlock machine for attaching circular collars to neck openings of T-Shirts and similar garments. Also for children's sizes.
5	MF7723C10B56C4Z4036 with workstation WS72800MC1A-MF	Binding neck, arm and leg openings, programmable differential feed Three-needle flatbed top and bottom cover stitch machine for binding neck, arm und leg openings of bathing suits, leisure wear and underwear. Quick change of stitch length. Differential feed adjustment by programmable stepper motor. Programmable for up to 50 different programmes. Up to 7 different differential feed adjustments within one programme. "Fast Action" tape cutter, pneumatically-operated, photocell and stitch-counter controlled.
6	MF7823E21B64UT25 with sewing stand UN653A851 and adjustable tension roller kit 29930CWS	Attaching elastic waistband Three needle cylinder bed bottom coverseam machine for attaching circular knitted elastic bands (soft waistband) to the waist of men's and women's slips. Standard folder for a 35 mm wide finished waist band. Also available: Folders for 25, 30, 40 and 45 mm wide finished waist band. Rapid adjustment of stitch length and differential feed. With pneumatically operated "KLIPP-IT" thread trimmer, with mechanical air operated needle thread wiper, presserfoot lifter.
7	MO6904COE6307Z931R with workstation WS72800VE15AHS and water spot sensor kit 29480ATM	Attaching two-tape elastic Single-needle, three thread cylinderbed machine with 3-row feed dog. For attaching two different wide elastic bands to the waist and leg openings on swimwear, slips and similar garments. Max. width of both elastics 29 mm. Min. width of elastic 6 mm. Includes stepping motor metering device with integrated cutter, special presser foot for automatic insertion of elastic, chain cutter and pneumatic presser foot lifter.
8	36200L200-60Z4008W with workstation WS72800ESW8A800	Flatseamer for pantyhose For overlapped flat joining of pantyhose. Rubber-coated feed dogs, optoelectronically and stitch-counter-controlled thread chain cutter within the presser foot. Feed dog extends past chain cutter knives. Suction device for trimmings.
9	36200L200-60Z3388AKS with workstation WS72800ES4A851	Flatseamer for seamless bodywear Four needle, six thread feed-off-the-arm Flatseamer with top cover thread for overlapped joining operations of knitted garment parts in the production of underwear and knitted outerwear. Quick adjustment for differential feed, knee switch operated. Horizontal cloth trimming mechanism. Photocell controlled thread chain cutter, close behind the presser foot, pneumatic presser foot lifter, suction device for trimmings and thread chain.
10	MO6904COE6307Z909RS with workstation WS72800VEEC16A, blower device 29927J and lamp assembly, for "seamless bodywear" 29937A	Attaching elastic Single-needle, three-thread cylinderbed machine. With 3-row feed dog for attaching elastic to the waist and leg openings of swimwear, slips and similar garments. Width of elastic 6 - 28 mm max. Stepper motor driven metering device with integrated tape cutter.
11	MF7722E10B40TC4MDZOE1 with workstation WS72800MZA-MF	Attaching elastic lace for seamless bodywear Two-needle flatbed top and bottom cover stitch machine for attaching elastic lace to slip leg openings, cut outs of bodies, bustiers and similar garments made of seamless materials. Quick-change for main and differential feed. Metering adjustment by programmable, sensor-controlled stepper motor. Up to 50 different programmes with up to 7 different elastic tensions are possible. A marked line in the fabric which is illuminated from below by an additional light-emitting panel serves for easy attaching of the elastic lace and simultaneously trimming the fabric. Trim removal device for wide trimmings. "FAST ACTION" tape cutter. Fabric undertrimmer. Maximum width of elastic lace approx. 15 mm.
12	MF7722J11B64Z4057 with sewing stand UH627G130	Belt-loop machine Two-needle coverseam belt-loop machine with front trimmer. Quick change for main feed. Differentiable, quick adjustable feed in the belt loop folder for making belt loops whereby the cloth is cut to the required width, folded and sewn to a belt loop.
13	35800BWDN9 with workstation WS72800ES12A, Pneumatic kit 29480BBB and double lap seam folder A10423B18-3/8	Feed-off-the-arm machine for Jeanswear Three-needle, feed-off-the arm double locked stitch differential feed right row of teeth. Machine for medium heavy weight material. Belt driven upper roller feed, step in sewing parts: 2.4 mm, high feed lift. 15 mm wide puller, sewing parts are the same as the original 35800DN. The feed dog has higher teeth in front of the needles for easier sewing start.
14	CS112T02-2M111UT with workstation WS72800GHP1A	Heel tape attaching Two needle cylinder bed double locked stitch machine for attaching cuff and heel tape from the roll to pre-closed trouser legs. Stitch length adjustment with push button. Micrometer dial adjustment for differential feed. With pneumatically operated "KLIPP-IT" thread trimmer, needle thread blower and presser foot lifter. Tape guide. Thumb screw adjusted tape tension.
15	35800BWDRP9Z4033 with pedestal PN446G130L	Feed-off-the-arm machine for filter materials Three needle, high capacity plain feed sewing machine with upper belt driven roller feed (needle bearing clutch); with wide roller to improve chaining between pieces. Needle cooler. With pneumatic presser foot and puller lifter. Flat sewing parts. With lap guide A9866A1/8 for producing filter tubes.
16	53400AK	Crochetta Universal use differential feed machine for all "Picoetta", fagoting and decorative stitching operations, such as: 1. Single-needle scallopping 2. Two-needle scallopping 3. Two-needle fagoting 4. Single-needle decorative stitching on fabric 5. Two-needle decorative stitching on fabric 6. Single-needle scallopping with elastic cord on edge of fabric 7. Two-needle scalloping with elastic cord on edge of fabric 8. Single-needle scallopping with braid or elastic on tips of scallops 9. Two-needle scallopping with braid or elastic on tips of scallops
17	81500BZ3290P	Joining artificial lawn carpets Overedging machine with lower and upper feed for joining artificial lawn carpets with high PU coating. Loading capacity 30 mm. Sewing capacity with two layers of material under presser foot from min. 15 to max. 22 mm. Performance test necessary. Seam width 10-12 mm, opened 20-25 mm.
18	81500CZ3374A	Attaching ropes to nets Single-needle, three-thread, high-throw overedge machine with plain feed and double-action intermittent puller. 2 upper rollers and 1 lower roller mech. driven. For attaching ropes from 4-12 mm diameter to various kinds of nettings as border and for tensioning, specially on sports nets and nets for safety and protection. For netting sewn parallel to the mesh, no feed dog is used and throat plate has no slots, only the puller feeds fabric (standard). For netting sewn diagonal to the edge, a feed dog and a throat plate are included, this allows better positioning of the strings. Sewing capacity: 10 mm.
19	53100B	Attaching pre-made waistband lining to waistbands of trousers Doublelocked "ZIG ZAG" Chainstitch Machine with upper roller feed, 3.2 mm needle zig-zag. For attaching pre-made waistband lining to waistbands of trousers, complete with adjustable folder 23450L.
20	2200FAC with transformer 998A61A and top lock spring balancer 90191M	Joining of fabrics for Dyeing and Finishing Portable machine. Single-thread, 42 V, 50/60 Hz, protection class III (safety extra low voltage), chromium-plated sewing parts.
21	3000AZ4025 with top lock spring balancer 90191M	Joining of dry fabrics for Dyeing and Finishing Portable machine. Single thread, 220-240 V, 50/60 Hz, protectiopn class I (with ground wire), with throat plate A10424 with small stitch hole and thin needle